Thingiverse
Vinyl Decal Squeegee 2.0
door great_timing
1
Downloads
5
Likes
0
Makes
For applying transfer tape onto cut-vinyl decals, and then for applying those decals onto surfaces.
This version improves upon the first few versions.
Credit Card size (3.37in x 2.125in (85.6mm x 53.98mm)).
Nice and flexible, but rigid where it needs to be.
A good first layer is important with this model.
Make sure your print seams don't end up on either of the long edges of the squeegee.
Recommended Slicer Settings:
Nozzle Size: 0.4mm
Layer Height: 0.2mm
Wall Count: 2
Infill: 100%
This version improves upon the first few versions.
Credit Card size (3.37in x 2.125in (85.6mm x 53.98mm)).
Nice and flexible, but rigid where it needs to be.
A good first layer is important with this model.
Make sure your print seams don't end up on either of the long edges of the squeegee.
Recommended Slicer Settings:
Nozzle Size: 0.4mm
Layer Height: 0.2mm
Wall Count: 2
Infill: 100%
great_timing publiceert ook op
15 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
