Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / Hand Tools / Vise (No hardware required)
Vise (No hardware required) – 3D printable model from MakerWorld MakerWorld
Hand Tools

Vise (No hardware required)

by Ms · Hand Tools
2.4k Downloads
1.8k Likes
1.2k Makes
Go to Model
此模型是一个实用的台虎钳，尺寸为：115*125*50mm，夹持范围0-65mm，夹持宽度50mm，底部夹持适合38mm以内台面（无夹持垫可夹持50mm台面） 尺寸相较于之前发布的（小台钳）大，适合有大号台钳需求的用户使用。 它具有打印简单快速、无支撑、坚固顺滑、无需五金件等特点。 特点： 无支撑打印，5H打印时长，180g耗材使用量。 尺寸：115*125*50mm，夹持范围0-65mm，夹持宽度50mm，底部夹持适合38mm以内台面（无夹持垫可夹持50mm台面）。 主螺栓设计横放打印，手柄分体设计，坚固、顺滑、不易断裂。 下方夹持垫创新性使用小螺栓固定，杜绝卡扣方式组装的缺陷。 可更换夹持垫设计，卡扣式限位，可选用tpu打印以获得更稳固的效果。 整体比例协调、外观漂亮、传承了小款台虎钳外观的同时，加大了体积，同时为更优的细节与强度提供了设计空间，您可以放心的尝试它！ 组装注意事项： 使用一个一字螺丝刀，也可打印一个小卡片替代。 主轴与手柄使用过盈配合+小螺栓，按压进去，拧紧螺栓即可。 下方夹持垫，手拧进去，可将螺丝刀倾斜来坚固它。 两个夹持垫完全相同，燕尾槽一侧带缺口，从缺口方向插入（如您插入遇到阻力，检查安装方向是否为缺口方向） *如您用途需要很大的加持力，可稍微润滑主螺栓。 *如需到夹持垫比较紧，我轻轻敲击拆装。 <col style="width:
Category
Hand Tools
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Medium confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
TPU
Min. bed size
125 mm (Medium)
Est. print time
5 h
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Vise (No hardware required)?
Any FDM printer should handle Vise (No hardware required) just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 125 mm is recommended.
How long does it take to print Vise (No hardware required)?
According to the design notes, Vise (No hardware required) takes approximately 5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Vise (No hardware required) available in?
Vise (No hardware required) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Vise (No hardware required) free to download?
Yes, Vise (No hardware required) is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Printed Table Vise
Printed Table Vise
by Makerbara
↓ 68 ♥ 15
Bench Vise (Interchangeable Jaws)
Bench Vise (Interchangeable Jaws)
by CCV
↓ 555 ♥ 199
Print-in-Place Vise Generator
Print-in-Place Vise Generator
by squinn
↓ 451 ♥ 304
Desktop Mini Vise
Desktop Mini Vise
by NYDER
↓ 28 ♥ 51
Splitting Vise (No hardware needed, compact, smooth, and sturdy)
Splitting Vise (No hardware needed, compact, smooth, and sturdy)
by Ms
↓ 554 ♥ 448
3D Printed Bench Vise XL
3D Printed Bench Vise XL
by K4Z1K_501
↓ 4 ♥ 2
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection