Vortex 150 - Runcam Split mini mount

This thing allows you to mount a runcam split to your ImmersionRC Vortex 150. It includes a mount for the actual camera module aswell as for the PCB Stack. Please note that all steps of the installation procedure need to be performed in a partucular order for it to go together correctly.

###Instructions:
>1) Remove 4 screws that hold the front skidplate and remove it and the piece of plastic it is holding. You won't need those parts (with the exception of the screws) for this installation.

>2) Remove 2 screws that hold the plastic camera dome. Unplug the camera from the main PCB and take it out of the dome.
>
>3) Assamble the runcam PCB stack with the included M2 spacers and nuts, you probably can't fit the front top nuts because of the screwheads that hold the camera dome, so just leave those to nuts off.
>
>4) Cut the cable that came with the origignal camera and solder one end to the runcams GND, 5V and Video Pads, you probably need to extend the wires. in order to reach