Wanhao D9/500 Camera Mount

Quickly designed this support to add a Logitech HD Pro C920 Web Cam to my D9/500. This was printed on my D9/500 and would need to be broken into parts if printed on a smaller printer.

This prints in 5 pieces.
Monster Camera Rail x1,
Monster Camera Clamp x2 (this file is two pieces)

You will need a 1/4-20 bolt to attach the camera itself

To attach the camera rail to the side clamps, you will need:
4 - 3mm x 8mm cap head screws
4 - 3mm washers
4 - 3mm nuts

I used my https://www.thingiverse.com/thing:4320090 as the adjustment knob on both sides.

I embedded a 1/4-20 nut into the cavity in the camera clamp. If you pause before the printer closes the hole, you should be able to drop a 1/4-20 right in and keep printing. DO NOT USE supports everywhere, or you will not be able to embed the nut (or use a support blocker, if that is better for you)

This system is designed to be easily adjustable and easily removable at any time (no tools required). HOWEVER, this has th