Waterproof Box

One of the best waterproof box ! Import from https://www.thingiverse.com/thing:4838803 The cam-latch closure is the toughest 3D printed box closure you can get. Features:Cam latchTPU printable sealCan be sealed with silicone instead of TPU6 sizesParametric Fusion 360 archiveSTEP fileOptional lanyard loopOptional filled body stl - generate your own internal cut-out in MeshmixerRequires 8x M3 x 20mm screws.Tested in PLA and PETG, should work with any rigid filament. Post-PrintingPrint Settings Printing the box :I recommend 3 perimeters to improve the strength of the walls. Use 5 or more top and bottom layers to ensure it is water tight, and at least 30% infill to give the bottom and top strength. Both PLA and PETG work well. Printing the latches and hinges :Use three perimeters and >30% infill. I recommend using PETG, but I also tested PLA. PLA works fine after printing, but there is a risk it will creep over time, making it looser and degrading the quality of the seal. I suggest printin