Waveshare 8.8" display & Raspberry Pi case

A case for the Waveshare 8.8" DSI display. The circuit board is supposed to be 68.45mm from the edge of the display from the technical drawing and 3D model. However, it's 3.5mm off on my unit (see pictures). I've included an additional STL file that uses the spec measurements in case there are different variants out there.Boost MePlease boost if you found this model useful!The back cover fits a Raspberry Pi 4 with all ports accessible. 4x M3 screws are required to attach the bezel and cover to the screen.