Waveshare UPS Module 3S Case

This is a case for the Waveshare UPS Module 3S. Commonly used to power Raspberry Pi Boards, but can be used to power anything that requires 5v.

https://www.waveshare.com/wiki/UPS_Module_3S

This case has:
* Mounting points for the 3S UPS Module Board
* Cutout for the DC in Plug
* Cutout for the Power button
* Hinged lid

You will have to add your own cutout for the DC 5v output.

The board can be oriented in either direction. There's plenty of room to wrap the power cables around the case or loop them between the DC in and Power button.

There are two version of the Case Body:
* **Waveshare_UPS_Module_3S-Case_Body_v2b.stl**
The board can be secured using an M3x10 bolt with washer and corresponding nut.
The opening for the nut at the bottom of the case is designed to be hot pressed in.
* **Waveshare_UPS_Module_3S-Case_Body_v3b.stl**
The board can be secured using an M3x10 bolt with washer and does not require a nut