Thingiverse
Wheel Loader
von champystile
88
Downloads
85
Likes
0
Makes
Parametric model of a wheel loader, with 3 position of the bucket.
For each model you want, print both sides plus 3 pins.
Glue the 3 pin on the first side, then assemble the two parts.
By edditing the original Fusion 360 file (available at http://a360.co/2reDwSw), you can make other bucket positions.
- Godet bas : alphaGodet=90°, alphaBras=136°, LV=9mm
- Godet bas : alphaGodet=50°, alphaBras=50°, LV=11mm
- Godet bas : alphaGodet=125°, alphaBras=50°, LV=9mm
Be sure to change the value 10° by 10° so the sketch solver follow.
For each model you want, print both sides plus 3 pins.
Glue the 3 pin on the first side, then assemble the two parts.
By edditing the original Fusion 360 file (available at http://a360.co/2reDwSw), you can make other bucket positions.
- Godet bas : alphaGodet=90°, alphaBras=136°, LV=9mm
- Godet bas : alphaGodet=50°, alphaBras=50°, LV=11mm
- Godet bas : alphaGodet=125°, alphaBras=50°, LV=9mm
Be sure to change the value 10° by 10° so the sketch solver follow.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
