White wolf

All of the pictures displayed are of the actual models. Please take a moment to rate and endorse the models, as it is very helpful. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x187.37mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #0086d6 PLA bambu cyan Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #2 (0.24mm) swap to Red At layer #6 (0.56mm) swap to Black At layer #8 (0.72mm) swap to Blue At layer #11 (0.96mm) swap to cyan At layer #17 (1.44mm) swap to Jade White At layer #27 (2.24mm) swap to Black for the rest.