Thingiverse
WIO-Control
door dagnall53
6
Downloads
7
Likes
0
Makes
This is a case for an ESP32 "Oled Wifi battery" development board so that it can be easily used as a Model Railway wireless Throttle with Rocrail.
To use this you will need need the ESP32 board, a battery, a 3 way membrane keypad and a rotary switch.
The software to make this work is Rob's excellent "WIO" (Wireless IO) software that is now part of his Rocrail software.
To explore Rocrail visit Rob's site: https://wiki.rocrail.net/doku.php
The "WIO specific" stuff is on https://wiki.rocrail.net/doku.php?id=arduino:wio-en
Rob used a slightly different pinout in his original default settings, using pin 36, which will require an external pull-up resistor if you use his wiring.
I chose a slightly different wiring scheme, (see Pins.txt) that does not need external pullups and uses the internal pullups for a very slightly simpler electrical interface.
Rob has now included this as an "official" option the WIO code: spo, to use "my" wiring, modify line 13 (or thereabouts) in USE
To use this you will need need the ESP32 board, a battery, a 3 way membrane keypad and a rotary switch.
The software to make this work is Rob's excellent "WIO" (Wireless IO) software that is now part of his Rocrail software.
To explore Rocrail visit Rob's site: https://wiki.rocrail.net/doku.php
The "WIO specific" stuff is on https://wiki.rocrail.net/doku.php?id=arduino:wio-en
Rob used a slightly different pinout in his original default settings, using pin 36, which will require an external pull-up resistor if you use his wiring.
I chose a slightly different wiring scheme, (see Pins.txt) that does not need external pullups and uses the internal pullups for a very slightly simpler electrical interface.
Rob has now included this as an "official" option the WIO code: spo, to use "my" wiring, modify line 13 (or thereabouts) in USE
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
