Wire spool

This is a spool for wires. With this part you can conveniantly store and transport wires. For example it will hold an isolated wire with a total diameter of 2,5 mm and a length of up to 40 m. If used for thinner wire it will hold much longer wires and you probably will not need the clamp-on parts (just print the "wire_spool_body.stl" file). The clamp-ons fit nicely on the ends and are used to increase the bending radius for thicker wires.

On both sides of the body are clamps for the wires. They not necessarily accommodate all sizes of wires but on the other hand you don't have to use them anyway.

The parts are fairly easy to print, but as the body of the spool has a total length of 196 mm your printer has to support this dimension.