Witch Pig

Here’s a MakerWorld-ready print profile for your Witch Pig (with supports emphasized): Witch Pig – Print Profile (Supports Required) This Witch Pig features detailed embossed symbols and raised elements across the body, making it a visually striking print—but also one that requires proper support settings for best results. ⚠️ IMPORTANT: SUPPORTS REQUIRED 🌳 Tree supports are HIGHLY recommended Required for: Belly and underside overhangs Chin and snout details Ears and side features Any raised symbols with overhang Tree supports help preserve fine details and reduce scarring compared to normal supports. Recommended Print Settings Printer Type: FDM Nozzle: 0.4 mm Layer Height: 0.16–0.2 mm Infill: 10–15% (Gyroid or Grid) Walls: 2–3 Top/Bottom Layers: 3–4 Speed: 40–55 mm/s (slower for detail) Supports: ON (Tree supports required) Support Density: 10–15% Support Placement: Build plate only (preferred) Support Interface: On, low density for easy removal Adhesion: Brim optional (3–5 lines) Material Recommendations PLA (Best choice) → captures fine symbol details cleanly PLA+ → improved durability for thin features PETG → usable but may make support removal harder Print Tips Use tree supports only to protect surface detail Lower support interface density to reduce cleanup marks Print slightly slower to improve symbol clarity Ensure cooling is strong for sharper detail Allow print to fully cool before removing supports Carefully remove supports around small symbols and ears Orientation Print flat on the feet (default orientation) Do not rotate—this orientation is optimized for support efficiency and detail Scaling Designed for 100% scale Can scale up for even sharper detail Avoid scaling too small or symbols may lose definition Creator Note This model is all about detail—supports are key to getting a clean final result. Take your time with removal and you’ll end up with a really unique piece! Tags