Wizard casting Fireball HueForge

Just a HueForge image of a wizard casting fireball. Image was AI generated with NightCafe. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA Anycubic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Gray Transmission Distance: 2PLA Paramount 3D Black Cherry Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5PLA Hatchbox True Red Transmission Distance: 4.5PLA GeeeTech Orange Transmission Distance: 8PLA Hatchbox True Yellow Transmission Distance: 6.8This print uses 8 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.88mm) swap to Blue GrayAt layer #12 (1.2mm) swap to GrayAt layer #14 (1.28mm) swap to Black CherryAt layer #15 (1.36mm) swap to Jade WhiteAt layer #16 (1.44mm) swap to RedAt layer #19 (1.