Wizard Creature HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Sunlu HS Orange Transmission Distance: 5.2 PLA Elegoo Rapid+ Red Transmission Distance: 4.6 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Orange At layer #15 (1.28mm) swap to Red At layer #20 (1.68mm) swap to White for the rest.