WLED Geode

After my PI Clock, I wondered if I could use WLED to do something similar, and so this project was born. To complete this project, you will need to know a little about WLED, don't worry though it's pretty easy and installing it on an ESP module is really easy. I won't cover the install and config here as it's covered by the instructions above. The base is designed around the LOLIN WeMOS D1 mini. The base also has a cutout for a USB-C breakout board for power. You can just put a cable in through the hole in the back and power your ESP directly. There are print profiles for 60, 80 and 100 LED strips. I use these 5v - 144/m strips. With these strips, you can make 2 Sixty LED geodes, a sixty and eighty, or one of the other sizes. I have added STL files for 120 and 140 runs, but I don't have a printer big enough to print them. Assembly is really simple. Once you have everything printed and soldered up, push the ring outer into the base top so that the LED ring is settabl