Wolf Hueforge

Wolf Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm (or 150x150mm) in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.1mm and the Actual Depth is 2.1mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.2PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 2 unique filaments ***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions:Start with BlackAt layer #15 (1.28mm) swap to Jade White for the rest. More Wildlife Hueforges Here:Bear 4-color HueforgeElephant 4-color HueforgePanda color HueforgeWolf Hueforge, Black and White Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks) <a target="_blank" href="https://makerworld.com/en/@HeyBen" rel="nofo