Wolf Moon Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben Wolf Moon Hueforge Print at 100% infill with a layer height of 0.04mm with a base layer of 1.1mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 1.12mmThe Max allowed Thickness is 4.56mm and the Actual Thickness is 2.04mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.2 #545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.1 #d1d3d5 PLA BambuLab Basic Light Gray Transmission Distance: 1.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.7This print uses 4 unique filaments ***attached .3mf file prints the first 4 layers at 0.25mm then the rest at 0.04mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions: Start with Black At layer #4 (1.24mm) swap