MakerWorld
Hueforge & Lithophane
Zum Modell
Wolf
38
Downloads
36
Likes
11
Makes
HueForge Project: A Wolf and Moon scene! Can’t go wrong with this classic combo. I hope everyone enjoys! Happy Printing! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 150x100mm in size. Filaments Used:PLA BambuLab Basic BlackPLA Inland Light GrayPLA Inland BeigePLA BambuLab Basic Jade White This print uses 4 unique filaments. End results will vary slightly with different brands and opacities of filament. But don’t hesitate to use your own brands if you have these colors in a different brand. **Bambu Lab filaments are a safe bet for good results. Swap Instructions: (if you do not have an AMS unit, just add a pause at the following layer numbers and swap to the next color) Start with BlackAt layer #7 swap to Light GrayAt layer #11 swap to BeigeAt layer #15 swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
