Wolverine Clock Hueforge

7 Color HueForge model. 'Wolverine Clock' filament painting made using Bambu filaments. if you are not familiar with printing at really fine layers such as 0.04 you will need to lower the print speed on printers like the Bambu(I recommend the following speed settings for the Bambu with 0.04 layers, inner walls, outer walls and gap infill - 200mm/s, sparse infill, internal solid infill and top surface - 150mm/s) Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm Filaments Used:Bambu PLA Matte Charcoal : Transmission Distance: 0.6Bambu PLA Basic Blue Gray : Transmission Distance: 3Bambu PLA Matte Ivory White : Transmission Distance: 3.6Bambu PLA Matte Dark Brown : Transmission Distance: 1Bambu PLA Matte Mandarin Orange : Transmission Distance: 3Bambu PLA Basic Yellow : Transmission Distance: 3Bambu PLA Matte Scarlet Red : Transmission Distance: 1.5 Swap Instructions:Start with CharcoalAt layer #8 (0.52mm) swap to Blue GrayAt layer #13 (0.72mm) swap to