Wolverine Scream

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 90x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.3mm and the Actual Depth is 2.4mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Kingroon Red Transmission Distance: 4.1 PLA BambuLab Basic Yellow Transmission Distance: 5.9 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #13 (1.12mm) swap to Blue Gray At layer #15 (1.28mm) swap to Red At layer #21 (1.76mm) swap to Yellow At layer #25 (2.08mm) swap to Beige At layer #27 (2.24mm) swap to Jade White for the rest.