WS2811 Pixel 24" Free Standing Easter Egg

This is an Easter Egg prop designed to be used with WS2811 Addressable Bullet Pixel LEDs. This prop stands 24" tall and uses 50 bullet pixels. It is a modular design that prints on a 256x256mm print bed with friction fit dovetails to assemble (no glue necessary). All joints are labeled by letters for easy assembly. It is recommended to assemble the prop on a hard level surface as some force is necessary to fit the pieces together. It has 2 mounting legs that can either be staked to the ground, or mounted to a hard surface using #8 3/4" screws. This can be set up to run in both XLights as well as WLED. I've included my recommended setup for both, but feel free to adapt it to your preference. WLED Setup:For One continuous string of effects:Segment 1 - LED 1-50For Separate effects on the outside rim and inside line:Segment 1 - Inside line LED 1-11Segment 2 - Outside Rim LED 12-50 Xlights Setup:Single line with 11 NodesCircle with 39 Nodes Chained after Single Line