X Carriage Cable Hub

请使用google翻译，英文不好，担心可能会造成误导
Thermal head cable management for printers.


I will share other board,and this one update in the facebook group:
https://www.facebook.com/groups/3228638717201092

#Has been rigorously tested, printing test 24 hours, working very well
#Description

Thermal head cable management for printers.

include:
2P 2.54 socket (6x XH2.54 2P): two cooling fans, one cooling fan, two temperature sensors, BLTouch
3P 2.54 socket (3x XH2.54 3P): One X limit, BLTouch, or IR, LED or steering gear
4P 2.54 socket (1x XH2.54 4P): a stepper motor interface.
2P 5.08 socket (1x DB2EVC-5.08-2P): 2 heaters
1x 43045 MX3.0 22P (maximum current 5A): connected to the motherboard
Two 2x KF2EDG 3.5MM 2P (maximum current 8A)
1K ohm chip resistor (2x 0805W8F1001T5E)
2 LEDs


The layout of the Header is 2.5mm wide and has two layers, so it is enough to pass 5A current. If it is a 12v power supply, it can also be up to 60W

LED can be connected or not connected, it can