XT30 Charge Indicator Cap
von WoodyInMD
2
Downloads
0
Likes
0
Makes
Improved XT30 Charge Indicator Cap
I had printed several other designs but, for reasons unknown, they were not a snug fit on the XT30 connectors.
I started from scratch with a slightly under-sized cover, adding the 'waist' protrusions and making the perimeter slightly thicker to reduce the flexibility a bit for a nice, snug fit.
Two designs: one with a slight raised feature and mid-height, the other full thickness.
Do not print singly.
I had printed several other designs but, for reasons unknown, they were not a snug fit on the XT30 connectors.
I started from scratch with a slightly under-sized cover, adding the 'waist' protrusions and making the perimeter slightly thicker to reduce the flexibility a bit for a nice, snug fit.
Two designs: one with a slight raised feature and mid-height, the other full thickness.
Do not print singly.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
