Thingiverse
XT60H Panel Mount
di robbbo
3
Download
0
Likes
0
Makes
Remix of devsfan1930 design.
I changed the design slightly so that it would fit in any wall, and you wouldn't need to modify the design to account for wall thickness.
Procedure:
-Route wires through back piece first, then solder XT60H connector.
-Push XT60 connector into front piece.
-Push back piece firmly against front piece, and use soldering iron to plastic weld them together tightly. You can also use small screws to join the pieces together.
-Drill 1" hole into wall
-Install assembly using 2 appropriate screws.
I changed the design slightly so that it would fit in any wall, and you wouldn't need to modify the design to account for wall thickness.
Procedure:
-Route wires through back piece first, then solder XT60H connector.
-Push XT60 connector into front piece.
-Push back piece firmly against front piece, and use soldering iron to plastic weld them together tightly. You can also use small screws to join the pieces together.
-Drill 1" hole into wall
-Install assembly using 2 appropriate screws.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
