Yellowjacket Quad

A racing quad design. Inspired by so many different 250 class racers.
Its modular and you can actually mount it together in different ways. For example, with the arms mid-deck (as shown) it has a nice COB for racing and sufficient room for the battery underbelly and camera mid deck.

You could mount the arms topdeck and hang a small gimble underneath. the props would be well clear and having the arms top deck would mean you could use larger props than the standard 5 inchers.

Printing in ABS

the decks and arms are done 0.4mm nozzle with 0.32mm layer height and 3 perimeters with 50% infill. Skids don't need to be as tough so 25% infill should be good. I actually want the skid to be a weak point so that in the event of a crash they go first. You will note that 4 long m3 bolts hold the majority of the structure together and subsequently the impact forces will be imparted on the skids.

Get some standoffs and m3 bolts, long ones like 35mm for the main assembly, some short 10mm