Thingiverse

Yet Another Raspberry Pi Zero Case

by jq910

44 Downloads

36 Likes

0 Makes

A pi zero case that I made around a year ago.
Should be compatible with the Zero W and the Zero 2.
Will work with the original Zero but the heat-sink cutout will be off.
The sd card is fully encased within the case to prevent it from getting damaged.

You will need:
- 4x M2.5*10mm screws
- 4x M2.5 Nuts

Variants available:
- All Cutouts
- Headers Only
- Heatsink Only
- No Cutouts

.step and .f3d files are available if you wish to edit it.

case electronics enclosure enclosure Pi Zero Pi Zero Case raspberry Raspberry Pi Raspberry pi 3 raspberry pi case Raspberry Pi Zero Raspberry Pi Zero W rpi RPi Zero case electronics enclosure enclosure Pi Zero Pi Zero Case raspberry Raspberry Pi Raspberry pi 3 raspberry pi case Raspberry Pi Zero Raspberry Pi Zero W rpi RPi Zero

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format