Yet another stackable planter

This is yet another stackable planter set. Each layer have a small water reserve making the watering easier and more efficient, and the water communication hole between an element and the element below is eccentric so that the water doesn't dig a fast tunnel between one layer and the other after some time.

The pieces of the set snaps-in one into the other so that you can achieve the height you need. There are 3 types of elements :

- Footer (Pied.stl) : ring part is designed to accept 25mm electric tube as feets ; their length must be adjusted to the height of the planter for good stability. I use 15cm lenght for a 5 stage planter. Caps to nicely close the tubes are included (Bouchon.stl)
- Spacers : small (Spacer bas.stl) of high (Spacer haut.stl) to give more space to your plants, shall they require it
- Planters themselves, in two height too: small (Corps bas v3.stl) or high (Corps haut v3.stl) to be stacked depending on the space needed by your plants

Everything is compab