Zipper Pull - Ghost (Pac Man)

Items you need:2 x “4mm x 30cm” paracord.*4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).*2 x “12mm” wiggly eyes.Super glue (for the eyes and magnets).*If you do not have wiggly eyes and magnets, I have included a 3D printed option - Eyes (black and white part) & a Connector. Suggested print settings for the Main Body:Layer height 0.2mm.Infill 30%.Position the print in a way that the joining face is facing downwards.No supports are needed. Suggested print settings for the Eyes:Layer height 0.2mm.Infill 15%.Position the print (both white and black) in a way that the chamfered side is facing upwards.No supports are needed.Affix the assembled eye to the main body with the chamfered side of the white part facing downwards. Suggested print settings for Connector:Layer height 0.2mm.Infill 50%.Perimeters: 5.Refer to the image for print orientation.No supports are needed.Choose the body (both sides of the body are identical) where you&#3