Zipper Pull - Skull Face

Boring zippers no more! Expanding the Zipper Pull collection - don't get spooked by this one! 💀 Items you need:2 x “4mm x 30cm” paracord.*4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).*2 x “12mm” wiggly eyes.Super glue (for components and magnets).*If you do not have wiggly eyes and magnets, I have included a 3D printed option - Eyes (black and white part) & a Connector. Suggested print settings for the Main Body:Layer height 0.2mm.Infill 30%.Position the print in a way that the joining face is facing downwards.No supports are needed. Suggested print settings for Mouth:Layer height 0.2mm.Infill 15%.Brim: Width 2mm.Brim Separation Gap: 0.2mm.Position the print in a way that the chamfered side is facing upwards.No supports are needed.Affix the mouth to the main body with the chamfered side facing downwards. Suggested print settings for the Eyes:Layer height 0.2mm.Infill 15%.Position the print (both white and black) in a way t