3DSEARCH

Discord

Zuko – 3D printable model from MakerWorld

MakerWorld

Hueforge & Lithophane

Zuko

by GrumyGramps · Hueforge & Lithophane

17 Downloads

15 Likes

1 Makes

Go to Model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Lemon Yellow At layer #14 (1.2mm) swap to Red At layer #19 (1.6mm) swap to White for the rest.

dragon ball z hueforge dragonballz zuko

Category

Hueforge & Lithophane

Source

MakerWorld

Published

29.12.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · large print

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Zuko?

Any FDM printer should handle Zuko just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Zuko need supports when printing?

Yes, Zuko will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Zuko available in?

Zuko is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Zuko free to download?

Yes, Zuko is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL