Trench of death #2 - Complete original set

This time a modular trench tile system set. Unlike the previouse version this set doesn't require the use of XPS foam. Just print, paint, add basing and it is ready to use, to create your trench battlefield. 1 current tile will recuire an avrage of 90gr / 30meter of PLA. With the standard parameters I used, it takes about 2hours and 45minutes to print, at 300mm/s, 0.2 layer height and with an infill of 4%. So a bit the opposite of the previous fast to print version. This basic set contains 37 tiles: 18 different trench tiles9 different room tiles8 battlefield tiles (+ some test tile files)2 bunker tiles Tile size: The original basic tiles, without the sandbags and ground structure attempt are 117,5mm x 117,5mm x 33mm @100%, but I made them 10% bigger (110%) for this project, so they have a size of 132mm x 132mm x 42mm. You can scale them down or up, depending how narrow, wide or high you want them to be. promo video 1:https://www.youtube.com/watch?v=diEbeACrBIo promo video 2:htt