AMS Buffer Injector Guides

The best PTFE guide plus PTFE Release (no tools require).There it is. Many Makers asked me for this after seeing the one I designed for the AMS Hub.https://makerworld.com/en/models/73523#profileId-77971Since the location is good, I didn't add a subplate and relocate the buffer. The drawback is that I only have a little wire management. In a certain way, it's better because there are no holes to tap or screws. It just "Smap in place".It's also easy to assemble;-Release the two PTFEs from the buffer.-Snap the central part on top of the AMS Buffer. (See the pictures above) (injector end first and snap the other end)-Slide in the two PTFE guides and secure them with the "C" ring. (The longer one goes in the Injector side)-Push in the two PTFEs. Tug them back to see if they lock in place.It's ready to go. Thanks to the realignment of the PTFE in the fittings, you won't need other tools and will avoid jams.It's not a bad idea to chamfer the inside of t