Thingiverse
Another Universal Spool Roller
von Bma801
18
Downloads
11
Likes
0
Makes
This is an adjustable spool roller to accommodate different size spools without having to unscrew anything to change filiments.
you need to print 2 of each part.
-you will need 4 bearings
-608ZZ (i: 8mm / d: 22mm / w: 7mm)
-2 bearings press onto each female part
-once bearings are set on female part slightly, press male part carefully until fully seated (may need to use a vise to press together)
-one side attaches into recessed squares and if wanted can be secured in place using 1/8" screws.
-mounts can be attached in fixed location using 1/8" screws as well.
-second roller set slides in channel to accommodate different spool sizes.
you need to print 2 of each part.
-you will need 4 bearings
-608ZZ (i: 8mm / d: 22mm / w: 7mm)
-2 bearings press onto each female part
-once bearings are set on female part slightly, press male part carefully until fully seated (may need to use a vise to press together)
-one side attaches into recessed squares and if wanted can be secured in place using 1/8" screws.
-mounts can be attached in fixed location using 1/8" screws as well.
-second roller set slides in channel to accommodate different spool sizes.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
