Thingiverse
Another Universal Spool Roller
par Bma801
18
Téléchargements
11
Likes
0
Makes
This is an adjustable spool roller to accommodate different size spools without having to unscrew anything to change filiments.
you need to print 2 of each part.
-you will need 4 bearings
-608ZZ (i: 8mm / d: 22mm / w: 7mm)
-2 bearings press onto each female part
-once bearings are set on female part slightly, press male part carefully until fully seated (may need to use a vise to press together)
-one side attaches into recessed squares and if wanted can be secured in place using 1/8" screws.
-mounts can be attached in fixed location using 1/8" screws as well.
-second roller set slides in channel to accommodate different spool sizes.
you need to print 2 of each part.
-you will need 4 bearings
-608ZZ (i: 8mm / d: 22mm / w: 7mm)
-2 bearings press onto each female part
-once bearings are set on female part slightly, press male part carefully until fully seated (may need to use a vise to press together)
-one side attaches into recessed squares and if wanted can be secured in place using 1/8" screws.
-mounts can be attached in fixed location using 1/8" screws as well.
-second roller set slides in channel to accommodate different spool sizes.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
