Thingiverse
Arcade Button Panel
von Syber_Space
96
Downloads
88
Likes
0
Makes
Inspired by Maker's Muse's Macro Keyboard:
https://www.youtube.com/watch?v=MeYuIWGqquE
A simple 3x3 arcade button panel for use as a macro controller, stream deck, or any other key-related needs. Design is held together with 6x2mm magnets embedded mid-print using PrusaSlicer's change filament feature (or Cura/M600 command). Sanwa OBSF-24 or other 24mm buttons should fit (I used knockoffs).
Fusion File: https://a360.co/2yvyi5L
*Bottom* has a hole, but no logo, so add your own!
*Bottom_Logo* has both a hole and the Syber-Space logo (as in picture)
*Bottom_NoHole* has no logo or hole, so add your own!
STEP file is provided, as is fusion link, so that other designs and logos can be made!
UPDATE 1: Lid, Lid_Logo, and Lid_ModifierMesh added. Lid slides a little, so further work may be needed. Magnet locations are inset further to avoid the lid pulling the top off.
https://www.youtube.com/watch?v=MeYuIWGqquE
A simple 3x3 arcade button panel for use as a macro controller, stream deck, or any other key-related needs. Design is held together with 6x2mm magnets embedded mid-print using PrusaSlicer's change filament feature (or Cura/M600 command). Sanwa OBSF-24 or other 24mm buttons should fit (I used knockoffs).
Fusion File: https://a360.co/2yvyi5L
*Bottom* has a hole, but no logo, so add your own!
*Bottom_Logo* has both a hole and the Syber-Space logo (as in picture)
*Bottom_NoHole* has no logo or hole, so add your own!
STEP file is provided, as is fusion link, so that other designs and logos can be made!
UPDATE 1: Lid, Lid_Logo, and Lid_ModifierMesh added. Lid slides a little, so further work may be needed. Magnet locations are inset further to avoid the lid pulling the top off.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
