Thingiverse
Arcade Button Panel
par Syber_Space
96
Téléchargements
88
Likes
0
Makes
Inspired by Maker's Muse's Macro Keyboard:
https://www.youtube.com/watch?v=MeYuIWGqquE
A simple 3x3 arcade button panel for use as a macro controller, stream deck, or any other key-related needs. Design is held together with 6x2mm magnets embedded mid-print using PrusaSlicer's change filament feature (or Cura/M600 command). Sanwa OBSF-24 or other 24mm buttons should fit (I used knockoffs).
Fusion File: https://a360.co/2yvyi5L
*Bottom* has a hole, but no logo, so add your own!
*Bottom_Logo* has both a hole and the Syber-Space logo (as in picture)
*Bottom_NoHole* has no logo or hole, so add your own!
STEP file is provided, as is fusion link, so that other designs and logos can be made!
UPDATE 1: Lid, Lid_Logo, and Lid_ModifierMesh added. Lid slides a little, so further work may be needed. Magnet locations are inset further to avoid the lid pulling the top off.
https://www.youtube.com/watch?v=MeYuIWGqquE
A simple 3x3 arcade button panel for use as a macro controller, stream deck, or any other key-related needs. Design is held together with 6x2mm magnets embedded mid-print using PrusaSlicer's change filament feature (or Cura/M600 command). Sanwa OBSF-24 or other 24mm buttons should fit (I used knockoffs).
Fusion File: https://a360.co/2yvyi5L
*Bottom* has a hole, but no logo, so add your own!
*Bottom_Logo* has both a hole and the Syber-Space logo (as in picture)
*Bottom_NoHole* has no logo or hole, so add your own!
STEP file is provided, as is fusion link, so that other designs and logos can be made!
UPDATE 1: Lid, Lid_Logo, and Lid_ModifierMesh added. Lid slides a little, so further work may be needed. Magnet locations are inset further to avoid the lid pulling the top off.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
