Automatic watch winder

An elegant Automatic watch winder with wood finish.Desighned for large wrist Watches It works with a D1 mini microcontroller and two stepper motors. Component list:D1 mini microcontroller: https://s.click.aliexpress.com/e/_c2yz2bsB2x Stepper motor with motor driver: https://s.click.aliexpress.com/e/_c3bp08OR2x 6001ZZ bearings: https://s.click.aliexpress.com/e/_c3FSeHun6x 7.35x13.5mm springs4x 3x633 Stainless Steel Dowels4x MR63zz Ball bearings7x M3x8 BHCS Machine Screws4x M3x6 BHCS Machine Screws Circuit DiagramYou will need Arduino IDE to Flash the program onto the D1 Mini https://support.arduino.cc/hc/en-us/articles/360019833020-Download-and-install-Arduino-IDE After Flashing Program:The D1 Mini will generate a WiFi network named “Watch Winder” for the first 10 minutes after power up. During this time you can connect to this network and configure your winder. The WiFi network SSID and password (default 12345678) can be edited in the firmware. Also the 10 minutes of WiFi vis