Balsa Stripper

The parts are 3D-printed from PLA plastic but can also be printed from PETG or any other suitable plastic. Layer height: 0.2 mm. The file *micrometer_holder.stl* should be printed twice, with one copy mirrored.

In addition to the printed parts, you will also need:

* A pair of micrometers with 25 mm spindle travel
* 2020N2 aluminum extrusion (in my build, length is 600 mm)
* Wooden board, 600 × 180 × 20 mm
* Cutting mat section, 600 × 160 mm
* M3 × 10 bolts, 9 pcs
* 3 × 10 wood screws, 6 pcs
* Steel wire, Ø 1.5 mm × 120 mm
* Several rubber bands
* Blade

The bolt holes require tapping with an M3 tap before assembly.