Thingiverse
Balsa Stripper
door klubov
2
Downloads
3
Likes
0
Makes
The parts are 3D-printed from PLA plastic but can also be printed from PETG or any other suitable plastic. Layer height: 0.2 mm. The file *micrometer_holder.stl* should be printed twice, with one copy mirrored.
In addition to the printed parts, you will also need:
* A pair of micrometers with 25 mm spindle travel
* 2020N2 aluminum extrusion (in my build, length is 600 mm)
* Wooden board, 600 × 180 × 20 mm
* Cutting mat section, 600 × 160 mm
* M3 × 10 bolts, 9 pcs
* 3 × 10 wood screws, 6 pcs
* Steel wire, Ø 1.5 mm × 120 mm
* Several rubber bands
* Blade
The bolt holes require tapping with an M3 tap before assembly.
In addition to the printed parts, you will also need:
* A pair of micrometers with 25 mm spindle travel
* 2020N2 aluminum extrusion (in my build, length is 600 mm)
* Wooden board, 600 × 180 × 20 mm
* Cutting mat section, 600 × 160 mm
* M3 × 10 bolts, 9 pcs
* 3 × 10 wood screws, 6 pcs
* Steel wire, Ø 1.5 mm × 120 mm
* Several rubber bands
* Blade
The bolt holes require tapping with an M3 tap before assembly.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!