Batman #2 HueForge with frame

I've included a mini frame for this. It prints in less than an hour and the print can be superglued to the frame or I have been using glue dots that are mostly used in scrapbooking. The frame prints great with the satndard .2 print profile. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 133.36x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mm Filaments Used: #0f1f0b PLA Bambu Labs Black Transmission Distance: 0.1 #3c4d62 PLA Bambu Labs Blue Grey Transmission Distance: 2.8 #9d522f PLA Bambu Labs Brown Transmission Distance: 1.2 #fac800 PLA Bambu Labs Yellow Transmission Distance: 5.6This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.64mm) swap to Blue Grey At layer #9 (0.88mm) swap to Brown At layer #12 (1.12mm) swap to Yellow for the rest.