Joker #2 HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.5x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #ff5869 PLA BambuLab Basic Pink Transmission Distance: 8 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #d1d3d5 PLA BambuLab Basic Light Gray Transmission Distance: 1.7 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #9 (0.8mm) swap to Pink At layer #12 (1.04mm) swap to Yellow At layer #15 (1.28mm) swap to Light Gray At layer #17 (1.44mm) swap to Jade White for the rest.