Batman 5 HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #57463c PLA BambuLab Matte Dark Brown Transmission Distance: 2 #d3b7a7 PLA BambuLab Matte Latte Brown Transmission Distance: 2 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 7 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #9 (0.8mm) swap to Dark Brown At layer #12 (1.04mm) swap to Latte Brown At layer #14 (1.2mm) swap to Cyan At layer #16 (1.36mm) swap to Jade White At layer #20 (1.68mm) swap to Yellow