Thingiverse
Bed level test
par DuckTheSam
1
Téléchargements
1
Likes
0
Makes
Info:
1) Be at the printer and watch it print.
2) You want the filament to just glide out and not drop down
3) If it drops, you want to higher the build area.
Print time: 6 minutes (MAX)
Tips:
If your print keeps falling off, try to lower the bed heat. I had the problem and then i made this file and lowered the bed heat, now it runs smoothly with no problems.
Check the Build Plate adhesion image and try to print with that.
1) Be at the printer and watch it print.
2) You want the filament to just glide out and not drop down
3) If it drops, you want to higher the build area.
Print time: 6 minutes (MAX)
Tips:
If your print keeps falling off, try to lower the bed heat. I had the problem and then i made this file and lowered the bed heat, now it runs smoothly with no problems.
Check the Build Plate adhesion image and try to print with that.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
