Thingiverse
Broom Bracket
door Dezign-it
538
Downloads
1.1k
Likes
3
Makes
DESIGNED IN ONSHAPE
This item is printed in one piece as an assembled item. When printing is complete remove the item and gently crack the pivots by opening the clamp in the direction of the hinge rotation....
This bracket is intended to be fixed using mirror tape, hence the larger base.
There are other brackets on my page with other fixings.
Visit my page for other VARIATIONS on this clip.
https://www.thingiverse.com/dezign-it/designs
NOTE: This clamp will perform differently depending on these main factors.
1. Choose of material printed with. Check this review for strength properties.
https://www.youtube.com/watch?v=BbbquNH5NFA
2. Number of wall layers
3. % infill
4. Direction of infill
5. Number of wall loops
This item is printed in one piece as an assembled item. When printing is complete remove the item and gently crack the pivots by opening the clamp in the direction of the hinge rotation....
This bracket is intended to be fixed using mirror tape, hence the larger base.
There are other brackets on my page with other fixings.
Visit my page for other VARIATIONS on this clip.
https://www.thingiverse.com/dezign-it/designs
NOTE: This clamp will perform differently depending on these main factors.
1. Choose of material printed with. Check this review for strength properties.
https://www.youtube.com/watch?v=BbbquNH5NFA
2. Number of wall layers
3. % infill
4. Direction of infill
5. Number of wall loops
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
