Bruce Lee

Project: BruceLee.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 152.33x230.01mm in sizeYou may print at higher layer heights below the Min Depth of 0.96mmThe Max Depth is 2.7mm and the Actual Depth is 2.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 5 PLA PolyLite White Transmission Distance: 5 This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #20 (1.68mm) swap to Orange At layer #22 (1.84mm) swap to White