Thingiverse
Cable Tidy
von Rapidhearts
170
Downloads
104
Likes
1
Makes
BEEFED UP THE CLIPS AND WIDENED THE CLIP GAP SO NOW THEY DON'T BREAK.
I made this cable tidy and printed labels for Computer ,Screen ,
Printer and Speakers as when ever I work on my Pc or need to use a socket without accidently shutting down my Pc it is handy to know what sockets I can use. This should be printed in ABS as ABS
flexes better when inserting the cables. If you do decide to print this with PLA I would recommend increasing the size by at least 10% to prevent the clips from breaking. I also recommend printing 2 of them to allow the clips to cool off before the next layer as I found printing one on its own the clips warped. Slowing print speed down would solve that problem but as I am new to printing I just printed 2 of
them
I made this cable tidy and printed labels for Computer ,Screen ,
Printer and Speakers as when ever I work on my Pc or need to use a socket without accidently shutting down my Pc it is handy to know what sockets I can use. This should be printed in ABS as ABS
flexes better when inserting the cables. If you do decide to print this with PLA I would recommend increasing the size by at least 10% to prevent the clips from breaking. I also recommend printing 2 of them to allow the clips to cool off before the next layer as I found printing one on its own the clips warped. Slowing print speed down would solve that problem but as I am new to printing I just printed 2 of
them
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
