Thingiverse
CastleLink Case
por 3DtoRC
19
Descargas
9
Likes
0
Makes
This is a case for the Castle Creations CastleLink.
• The heat shrink has to be removed
• The CastleLink slides in and gets locked into the case
• The LEDs and wiring diagram are viewed through the window.
•• The case will have to be broken to remove the CastleLink
•••>>> UPDATE I have only tested the V3 with the mirco connector, so let me know if the V3 case for the mini connectors has issues.
Recommend printing with a raft and supports, with the narrow side down (where the pins come out).
• The heat shrink has to be removed
• The CastleLink slides in and gets locked into the case
• The LEDs and wiring diagram are viewed through the window.
•• The case will have to be broken to remove the CastleLink
•••>>> UPDATE I have only tested the V3 with the mirco connector, so let me know if the V3 case for the mini connectors has issues.
Recommend printing with a raft and supports, with the narrow side down (where the pins come out).
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
