Thingiverse
CastleLink Case
door 3DtoRC
19
Downloads
9
Likes
0
Makes
This is a case for the Castle Creations CastleLink.
• The heat shrink has to be removed
• The CastleLink slides in and gets locked into the case
• The LEDs and wiring diagram are viewed through the window.
•• The case will have to be broken to remove the CastleLink
•••>>> UPDATE I have only tested the V3 with the mirco connector, so let me know if the V3 case for the mini connectors has issues.
Recommend printing with a raft and supports, with the narrow side down (where the pins come out).
• The heat shrink has to be removed
• The CastleLink slides in and gets locked into the case
• The LEDs and wiring diagram are viewed through the window.
•• The case will have to be broken to remove the CastleLink
•••>>> UPDATE I have only tested the V3 with the mirco connector, so let me know if the V3 case for the mini connectors has issues.
Recommend printing with a raft and supports, with the narrow side down (where the pins come out).
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!