Chainsaw Man - Power - Stylized Poster

Hueforges can be resized by adjusting only the X and Y scale—leave the Z height unchanged for best results. Hueforge art inspired by Power from the Chainsaw Man Manga Each print is 133x200mm These prints display wonderfully with a 3d printed HueForge stand, such as the middle size shown here (as shown in the print photos): https://makerworld.com/en/models/153050-3-collapsable-stand-sizes-hueforge-etc?from=search#profileId-167215 Project: Chainsaw Man Power.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.15x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions