Thingiverse
Compound Bow Stand
von cncope
11
Downloads
11
Likes
0
Makes
Compound Bow Stand
The original model has been adjusted for better printability if you need to print the stand vertically.
Fasten the legs with M5 Allen bolts, 20 mm long. There are holes in the legs for M5 threaded inserts. Use at least a 3 mm wall thickness due to the inserts.
The legs also have holes so the stand can be attached to a larger plate if needed.
The original model has been adjusted for better printability if you need to print the stand vertically.
Fasten the legs with M5 Allen bolts, 20 mm long. There are holes in the legs for M5 threaded inserts. Use at least a 3 mm wall thickness due to the inserts.
The legs also have holes so the stand can be attached to a larger plate if needed.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
